Add MeshCore relay_radio firmware for Heltec T114

examples/simple_repeater/main.cpp

@@ -0,0 +1,164 @@
+#include <Arduino.h>   // needed for PlatformIO
+#include <Mesh.h>
+
+#include "MyMesh.h"
+
+#ifdef DISPLAY_CLASS
+  #include "UITask.h"
+  static UITask ui_task(display);
+#endif
+
+StdRNG fast_rng;
+SimpleMeshTables tables;
+
+MyMesh the_mesh(board, radio_driver, *new ArduinoMillis(), fast_rng, rtc_clock, tables);
+
+void halt() {
+  while (1) ;
+}
+
+static char command[160];
+
+// For power saving
+unsigned long POWERSAVING_FIRSTSLEEP_SECS = 120; // The first sleep (if enabled) from boot
+
+#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_)
+static unsigned long userBtnDownAt = 0;
+#define USER_BTN_HOLD_OFF_MILLIS 1500
+#endif
+
+void setup() {
+  Serial.begin(115200);
+  delay(1000);
+
+  board.begin();
+
+#if defined(MESH_DEBUG) && defined(NRF52_PLATFORM)
+  // give some extra time for serial to settle so
+  // boot debug messages can be seen on terminal
+  delay(5000);
+#endif
+
+#ifdef DISPLAY_CLASS
+  if (display.begin()) {
+    display.startFrame();
+    display.setCursor(0, 0);
+    display.print("Please wait...");
+    display.endFrame();
+  }
+#endif
+
+  if (!radio_init()) {
+    MESH_DEBUG_PRINTLN("Radio init failed!");
+    halt();
+  }
+
+  fast_rng.begin(radio_driver.getRngSeed());
+
+  FILESYSTEM* fs;
+#if defined(NRF52_PLATFORM) || defined(STM32_PLATFORM)
+  InternalFS.begin();
+  fs = &InternalFS;
+  IdentityStore store(InternalFS, "");
+#elif defined(ESP32)
+  SPIFFS.begin(true);
+  fs = &SPIFFS;
+  IdentityStore store(SPIFFS, "/identity");
+#elif defined(RP2040_PLATFORM)
+  LittleFS.begin();
+  fs = &LittleFS;
+  IdentityStore store(LittleFS, "/identity");
+  store.begin();
+#else
+  #error "need to define filesystem"
+#endif
+  if (!store.load("_main", the_mesh.self_id)) {
+    MESH_DEBUG_PRINTLN("Generating new keypair");
+    the_mesh.self_id = radio_new_identity();   // create new random identity
+    int count = 0;
+    while (count < 10 && (the_mesh.self_id.pub_key[0] == 0x00 || the_mesh.self_id.pub_key[0] == 0xFF)) {  // reserved id hashes
+      the_mesh.self_id = radio_new_identity(); count++;
+    }
+    store.save("_main", the_mesh.self_id);
+  }
+
+  Serial.print("Repeater ID: ");
+  mesh::Utils::printHex(Serial, the_mesh.self_id.pub_key, PUB_KEY_SIZE); Serial.println();
+
+  command[0] = 0;
+
+  sensors.begin();
+
+  the_mesh.begin(fs);
+
+#ifdef DISPLAY_CLASS
+  ui_task.begin(the_mesh.getNodePrefs(), FIRMWARE_BUILD_DATE, FIRMWARE_VERSION);
+#endif
+
+  // send out initial zero hop Advertisement to the mesh
+#if ENABLE_ADVERT_ON_BOOT == 1
+  the_mesh.sendSelfAdvertisement(16000, false);
+#endif
+
+  board.onBootComplete();
+}
+
+void loop() {
+  int len = strlen(command);
+  while (Serial.available() && len < sizeof(command)-1) {
+    char c = Serial.read();
+    if (c != '\n') {
+      command[len++] = c;
+      command[len] = 0;
+      Serial.print(c);
+    }
+    if (c == '\r') break;
+  }
+  if (len == sizeof(command)-1) {  // command buffer full
+    command[sizeof(command)-1] = '\r';
+  }
+
+  if (len > 0 && command[len - 1] == '\r') {  // received complete line
+    Serial.print('\n');
+    command[len - 1] = 0;  // replace newline with C string null terminator
+    char reply[160];
+    the_mesh.handleCommand(0, command, reply);  // NOTE: there is no sender_timestamp via serial!
+    if (reply[0]) {
+      Serial.print("  -> "); Serial.println(reply);
+    }
+
+    command[0] = 0;  // reset command buffer
+  }
+
+#if defined(PIN_USER_BTN) && defined(_SEEED_SENSECAP_SOLAR_H_)
+  // Hold the user button to power off the SenseCAP Solar repeater.
+  int btnState = digitalRead(PIN_USER_BTN);
+  if (btnState == LOW) {
+    if (userBtnDownAt == 0) {
+      userBtnDownAt = millis();
+    } else if ((unsigned long)(millis() - userBtnDownAt) >= USER_BTN_HOLD_OFF_MILLIS) {
+      Serial.println("Powering off...");
+      board.powerOff();  // does not return
+    }
+  } else {
+    userBtnDownAt = 0;
+  }
+#endif
+
+  the_mesh.loop();
+  sensors.loop();
+#ifdef DISPLAY_CLASS
+  ui_task.loop();
+#endif
+  rtc_clock.tick();
+
+  if (the_mesh.getNodePrefs()->powersaving_enabled && !the_mesh.hasPendingWork()) {
+#if defined(NRF52_PLATFORM)
+    board.sleep(0); // nrf ignores seconds param, sleeps whenever possible
+#else
+    if (the_mesh.millisHasNowPassed(POWERSAVING_FIRSTSLEEP_SECS * 1000)) { // To check if it is time to sleep
+      board.sleep(30); // Sleep. Wake up after a while or when receiving a LoRa packet
+    }
+#endif
+  }
+}