Add MeshCore relay_radio firmware for Heltec T114

variants/ebyte_eora_s3/target.cpp

@@ -0,0 +1,70 @@
+#include <Arduino.h>
+#include "target.h"
+
+ESP32Board board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+#ifndef LORA_CR
+  #define LORA_CR      5
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+  
+#ifdef SX126X_DIO3_TCXO_VOLTAGE
+  float tcxo = SX126X_DIO3_TCXO_VOLTAGE;
+#else
+  float tcxo = 1.6f;
+#endif
+
+#if defined(P_LORA_SCLK)
+  spi.begin(P_LORA_SCLK, P_LORA_MISO, P_LORA_MOSI);
+#endif
+  int status = radio.begin(LORA_FREQ, LORA_BW, LORA_SF, LORA_CR, RADIOLIB_SX126X_SYNC_WORD_PRIVATE, LORA_TX_POWER, 8, tcxo);
+  if (status != RADIOLIB_ERR_NONE) {
+    Serial.print("ERROR: radio init failed: ");
+    Serial.println(status);
+    return false;  // fail
+  }
+  
+  radio.setCRC(1);
+  
+#if defined(SX126X_RXEN) && defined(SX126X_TXEN)
+  radio.setRfSwitchPins(SX126X_RXEN, SX126X_TXEN);
+#endif
+
+#ifdef SX126X_CURRENT_LIMIT
+  radio.setCurrentLimit(SX126X_CURRENT_LIMIT);
+#endif
+#ifdef SX126X_DIO2_AS_RF_SWITCH
+  radio.setDio2AsRfSwitch(SX126X_DIO2_AS_RF_SWITCH);
+#endif
+#ifdef SX126X_RX_BOOSTED_GAIN
+  radio.setRxBoostedGainMode(SX126X_RX_BOOSTED_GAIN);
+#endif
+
+  return true;  // success
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}