Add MeshCore relay_radio firmware for Heltec T114

variants/heltec_wireless_paper/platformio.ini

@@ -0,0 +1,172 @@
+[Heltec_Wireless_Paper_base]
+extends = esp32_base
+board = esp32-s3-devkitc-1
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/heltec_wireless_paper
+  -D HELTEC_WIRELESS_PAPER
+  ;-D ARDUINO_USB_CDC_ON_BOOT=1      ; this breaks Serial
+  -D P_LORA_DIO_1=14
+  -D P_LORA_NSS=8
+  -D P_LORA_RESET=RADIOLIB_NC
+  -D P_LORA_BUSY=13
+  -D P_LORA_SCLK=9
+  -D P_LORA_MISO=11
+  -D P_LORA_MOSI=10
+  -D USE_SX1262
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D P_LORA_TX_LED=18
+  ;-D PIN_BOARD_SDA=17
+  ;-D PIN_BOARD_SCL=18               ; same GPIO as P_LORA_TX_LED
+  -D PIN_USER_BTN=0
+  -D PIN_VEXT_EN=45
+  -D ADC_MULTIPLIER=8.4
+  -D PIN_VBAT_READ=20
+  -D PIN_ADC_CTRL=19
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D DISP_CS=4
+  -D DISP_BUSY=7
+  -D DISP_DC=5
+  -D DISP_RST=6
+  -D DISP_SCLK=3
+  -D DISP_MOSI=2
+  -D ARDUINO_heltec_wifi_lora_32_V3
+  -D WIRELESS_PAPER
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/heltec_wireless_paper>
+lib_deps =
+  ${esp32_base.lib_deps}
+  https://github.com/todd-herbert/heltec-eink-modules/archive/9207eb6ab2b96f66298e0488740218c17b006af7.zip
+
+[env:Heltec_Wireless_Paper_companion_radio_ble]
+extends = Heltec_Wireless_Paper_base
+build_flags =
+  ${Heltec_Wireless_Paper_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=E213Display
+  -D BLE_PIN_CODE=123456   ; dynamic, random PIN
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<helpers/ui/E213Display.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_Wireless_Paper_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  bakercp/CRC32 @ ^2.0.0
+
+[env:Heltec_Wireless_Paper_companion_radio_usb]
+extends = Heltec_Wireless_Paper_base
+build_flags =
+  ${Heltec_Wireless_Paper_base.build_flags}
+  -I examples/companion_radio/ui-new
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D DISPLAY_CLASS=E213Display
+  -D OFFLINE_QUEUE_SIZE=256
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<helpers/ui/E213Display.cpp>
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${Heltec_Wireless_Paper_base.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  bakercp/CRC32 @ ^2.0.0
+
+[env:Heltec_Wireless_Paper_repeater]
+extends = Heltec_Wireless_Paper_base
+build_flags =
+  ${Heltec_Wireless_Paper_base.build_flags}
+  -D DISPLAY_CLASS=E213Display
+  -D ADVERT_NAME='"Heltec WP Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<helpers/ui/E213Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_Wireless_Paper_base.lib_deps}
+  ${esp32_ota.lib_deps}
+  bakercp/CRC32 @ ^2.0.0
+
+; [env:Heltec_Wireless_Paper_repeater_bridge_rs232]
+; extends = Heltec_Wireless_Paper_base
+; build_flags =
+;   ${Heltec_Wireless_Paper_base.build_flags}
+;   -D DISPLAY_CLASS=E213Display
+;   -D ADVERT_NAME='"RS232 Bridge"'
+;   -D ADVERT_LAT=0.0
+;   -D ADVERT_LON=0.0
+;   -D ADMIN_PASSWORD='"password"'
+;   -D MAX_NEIGHBOURS=50
+;   -D WITH_RS232_BRIDGE=Serial2
+;   -D WITH_RS232_BRIDGE_RX=5
+;   -D WITH_RS232_BRIDGE_TX=6
+;  -D BRIDGE_DEBUG=1
+; ;  -D MESH_PACKET_LOGGING=1
+; ;  -D MESH_DEBUG=1
+; build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+;   +<helpers/bridges/RS232Bridge.cpp>
+;   +<helpers/ui/E213Display.cpp>
+;   +<../examples/simple_repeater>
+; lib_deps =
+;   ${Heltec_Wireless_Paper_base.lib_deps}
+;   ${esp32_ota.lib_deps}
+
+[env:Heltec_Wireless_Paper_repeater_bridge_espnow]
+extends = Heltec_Wireless_Paper_base
+build_flags =
+  ${Heltec_Wireless_Paper_base.build_flags}
+  -D DISPLAY_CLASS=E213Display
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<helpers/ui/E213Display.cpp>
+  +<../examples/simple_repeater>
+lib_deps =
+  ${Heltec_Wireless_Paper_base.lib_deps}
+  ${esp32_ota.lib_deps}
+  bakercp/CRC32 @ ^2.0.0
+
+[env:Heltec_Wireless_Paper_room_server]
+extends = Heltec_Wireless_Paper_base
+build_flags =
+  ${Heltec_Wireless_Paper_base.build_flags}
+  -D DISPLAY_CLASS=E213Display
+  -D ADVERT_NAME='"Heltec WP Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<helpers/ui/E213Display.cpp>
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Heltec_Wireless_Paper_base.lib_deps}
+  ${esp32_ota.lib_deps}
+  bakercp/CRC32 @ ^2.0.0
+
+[env:Heltec_Wireless_Paper_kiss_modem]
+extends = Heltec_Wireless_Paper_base
+build_src_filter = ${Heltec_Wireless_Paper_base.build_src_filter}
+  +<../examples/kiss_modem/>

variants/heltec_wireless_paper/target.cpp

@@ -0,0 +1,39 @@
+#include "target.h"
+#include <Arduino.h>
+
+HeltecWirelessPaperBoard board;
+
+#if defined(P_LORA_SCLK)
+  static SPIClass spi;
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+#else
+  RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY);
+#endif
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+
+SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+DISPLAY_CLASS display;
+MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+#if defined(P_LORA_SCLK)
+  return radio.std_init(&spi);
+#else
+  return radio.std_init();
+#endif
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng); // create new random identity
+}
+

variants/heltec_wireless_paper/target.h

@@ -0,0 +1,32 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <../heltec_v3/HeltecV3Board.h>
+class HeltecWirelessPaperBoard : public HeltecV3Board {
+public:
+  const char* getManufacturerName() const override {
+    return "Heltec Wireless Paper";
+  }
+};
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#ifdef DISPLAY_CLASS
+#include <helpers/ui/E213Display.h>
+#include <helpers/ui/MomentaryButton.h>
+#endif
+
+extern HeltecWirelessPaperBoard board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern SensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+extern DISPLAY_CLASS display;
+extern MomentaryButton user_btn;
+#endif
+
+bool radio_init();
+mesh::LocalIdentity radio_new_identity();