Add MeshCore relay_radio firmware for Heltec T114

variants/meshadventurer/platformio.ini

@@ -0,0 +1,351 @@
+[Meshadventurer]
+extends = esp32_base
+board = esp32doit-devkit-v1
+board_build.partitions = min_spiffs.csv ; get around 4mb flash limit
+build_flags =
+  ${esp32_base.build_flags}
+  -I variants/meshadventurer
+  -D MESHADVENTURER
+  -D P_LORA_TX_LED=2
+  -D PIN_VBAT_READ=35
+  -D PIN_USER_BTN=39
+  -D P_LORA_DIO_1=33
+  -D P_LORA_NSS=18
+  -D P_LORA_RESET=23
+  -D P_LORA_BUSY=32
+  -D P_LORA_SCLK=5
+  -D P_LORA_MOSI=27
+  -D P_LORA_MISO=19
+  -D SX126X_TXEN=13
+  -D SX126X_RXEN=14
+  -D PIN_BOARD_SDA=21
+  -D PIN_BOARD_SCL=22
+  -D SX126X_DIO2_AS_RF_SWITCH=false
+  -D SX126X_DIO3_TCXO_VOLTAGE=1.8
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D PIN_GPS_RX=12
+  -D PIN_GPS_TX=15
+  -D DISPLAY_CLASS=SSD1306Display
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../variants/meshadventurer>
+  +<helpers/ui/MomentaryButton.cpp>
+  +<helpers/ui/SSD1306Display.cpp>
+lib_deps =
+  ${esp32_base.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+
+[env:Meshadventurer_sx1262_repeater]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_repeater>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"Meshadventurer Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+; [env:Meshadventurer_sx1262_repeater_bridge_rs232]
+; extends = Meshadventurer
+; build_src_filter = ${Meshadventurer.build_src_filter}
+;   +<helpers/bridges/RS232Bridge.cpp>
+;   +<../examples/simple_repeater>
+; build_flags =
+;   ${Meshadventurer.build_flags}
+;   -D RADIO_CLASS=CustomSX1262
+;   -D WRAPPER_CLASS=CustomSX1262Wrapper
+;   -D LORA_TX_POWER=22
+;   -D ADVERT_NAME='"RS232 Bridge"'
+;   -D ADVERT_LAT=0.0
+;   -D ADVERT_LON=0.0
+;   -D ADMIN_PASSWORD='"password"'
+;   -D MAX_NEIGHBOURS=50
+;   -D WITH_RS232_BRIDGE=Serial2
+;   -D WITH_RS232_BRIDGE_RX=5
+;   -D WITH_RS232_BRIDGE_TX=6
+;  -D BRIDGE_DEBUG=1
+; ;  -D MESH_PACKET_LOGGING=1
+; ;  -D MESH_DEBUG=1
+; lib_deps =
+;   ${Meshadventurer.lib_deps}
+;   ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1262_repeater_bridge_espnow]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<../examples/simple_repeater>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1268_repeater]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_repeater>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"Meshadventurer Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+; [env:Meshadventurer_sx1268_repeater_bridge_rs232]
+; extends = Meshadventurer
+; build_src_filter = ${Meshadventurer.build_src_filter}
+;   +<helpers/bridges/RS232Bridge.cpp>
+;   +<../examples/simple_repeater>
+;   +<helpers/ui/SSD1306Display.cpp>
+; build_flags =
+;   ${Meshadventurer.build_flags}
+;   -D RADIO_CLASS=CustomSX1268
+;   -D WRAPPER_CLASS=CustomSX1268Wrapper
+;   -D LORA_TX_POWER=22
+;   -D ADVERT_NAME='"RS232 Bridge"'
+;   -D ADVERT_LAT=0.0
+;   -D ADVERT_LON=0.0
+;   -D ADMIN_PASSWORD='"password"'
+;   -D MAX_NEIGHBOURS=50
+;   -D WITH_RS232_BRIDGE=Serial2
+;   -D WITH_RS232_BRIDGE_RX=5
+;   -D WITH_RS232_BRIDGE_TX=6
+;  -D BRIDGE_DEBUG=1
+; ;  -D MESH_PACKET_LOGGING=1
+; ;  -D MESH_DEBUG=1
+; lib_deps =
+;   ${Meshadventurer.lib_deps}
+;   ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1268_repeater_bridge_espnow]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<helpers/bridges/ESPNowBridge.cpp>
+  +<../examples/simple_repeater>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"ESPNow Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_ESPNOW_BRIDGE=1
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1262_companion_radio_usb]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=160
+  -D MAX_GROUP_CHANNELS=40
+  -D OFFLINE_QUEUE_SIZE=128
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1262_companion_radio_ble]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=160
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=128
+  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1262_terminal_chat]
+extends = Meshadventurer
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1262_room_server]
+extends = Meshadventurer
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"Meshadventurer Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1268_companion_radio_usb]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=160
+  -D OFFLINE_QUEUE_SIZE=128
+  -D MAX_GROUP_CHANNELS=40
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1268_companion_radio_ble]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<helpers/esp32/*.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+build_flags =
+  ${Meshadventurer.build_flags}
+  -I examples/companion_radio/ui-new
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=160
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=128
+  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1268_terminal_chat]
+extends = Meshadventurer
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:Meshadventurer_sx1268_room_server]
+extends = Meshadventurer
+build_flags =
+  ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22
+  -D ADVERT_NAME='"Meshadventurer Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps =
+  ${Meshadventurer.lib_deps}
+  ${esp32_ota.lib_deps}
+
+[env:Meshadventurer_sx1262_kiss_modem]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/kiss_modem/>
+build_flags = ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+
+[env:Meshadventurer_sx1268_kiss_modem]
+extends = Meshadventurer
+build_src_filter = ${Meshadventurer.build_src_filter}
+  +<../examples/kiss_modem/>
+build_flags = ${Meshadventurer.build_flags}
+  -D RADIO_CLASS=CustomSX1268
+  -D WRAPPER_CLASS=CustomSX1268Wrapper
+  -D LORA_TX_POWER=22

variants/meshadventurer/target.cpp

@@ -0,0 +1,102 @@
+#include <Arduino.h>
+#include "target.h"
+
+#include <helpers/sensors/MicroNMEALocationProvider.h>
+
+MeshadventurerBoard board;
+
+static SPIClass spi;
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, spi);
+WRAPPER_CLASS radio_driver(radio, board);
+
+ESP32RTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+MASensorManager sensors = MASensorManager(nmea);
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+  MomentaryButton user_btn(PIN_USER_BTN, 1000, true);
+#endif
+
+bool radio_init() {
+  fallback_clock.begin();
+  rtc_clock.begin(Wire);
+
+#if defined(P_LORA_SCLK)
+  return radio.std_init(&spi);
+#else
+  return radio.std_init();
+#endif
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}
+
+
+void MASensorManager::start_gps() {
+  if(!gps_active) {
+    MESH_DEBUG_PRINTLN("starting GPS");
+    gps_active = true;
+  }
+}
+
+void MASensorManager::stop_gps() {
+  if(gps_active) {
+    MESH_DEBUG_PRINTLN("stopping GPS");
+    gps_active = false;
+  }
+}
+
+bool MASensorManager::begin() {
+  Serial1.setPins(PIN_GPS_RX, PIN_GPS_TX);
+  Serial1.begin(9600);
+  delay(500);
+  return true;
+}
+
+bool MASensorManager::querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) {
+  if(requester_permissions & TELEM_PERM_LOCATION) {   // does requester have permission?
+    telemetry.addGPS(TELEM_CHANNEL_SELF, node_lat, node_lon, node_altitude);
+  }
+  return true;
+}
+
+void MASensorManager::loop() {
+  static long next_gps_update = 0;
+  _location->loop();
+  if(millis() > next_gps_update && gps_active) {
+    if(_location->isValid()) {
+      node_lat = ((double)_location->getLatitude()) / 1000000.;
+      node_lon = ((double)_location->getLongitude()) / 1000000.;
+      node_altitude = ((double)_location->getAltitude()) / 1000.0;
+      MESH_DEBUG_PRINTLN("lat %f lon %f", node_lat, node_lon);
+    }
+    next_gps_update = millis() + 1000;
+  }
+}
+
+int MASensorManager::getNumSettings() const { return 1; }  // just one supported: "gps" (power switch)
+
+const char* MASensorManager::getSettingName(int i) const {
+  return i == 0 ? "gps" : NULL;
+}
+const char* MASensorManager::getSettingValue(int i) const {
+  if(i == 0) {
+    return gps_active ? "1" : "0";
+  }
+  return NULL;
+}
+bool MASensorManager::setSettingValue(const char* name, const char* value) {
+  if(strcmp(name, "gps") == 0) {
+    if(strcmp(value, "0") == 0) {
+      stop_gps();
+    } else {
+      start_gps();
+    }
+    return true;
+  }
+  return false;  // not supported
+}

variants/meshadventurer/target.h

@@ -0,0 +1,47 @@
+#pragma once
+
+#define RADIOLIB_STATIC_ONLY 1
+#include <RadioLib.h>
+#include <helpers/radiolib/RadioLibWrappers.h>
+#include <helpers/MeshadventurerBoard.h>
+#include <helpers/radiolib/CustomSX1262Wrapper.h>
+#include <helpers/radiolib/CustomSX1268Wrapper.h>
+#include <helpers/AutoDiscoverRTCClock.h>
+#include <helpers/SensorManager.h>
+#include <helpers/sensors/LocationProvider.h>
+#ifdef DISPLAY_CLASS
+  #include <helpers/ui/SSD1306Display.h>
+  #include <helpers/ui/MomentaryButton.h>
+#endif
+
+class MASensorManager : public SensorManager {
+  bool gps_active = false;
+  LocationProvider * _location;
+
+  void start_gps();
+  void stop_gps();
+public:
+  MASensorManager(LocationProvider &location): _location(&location) { }
+  bool begin() override;
+  bool querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) override;
+  void loop() override;
+  int getNumSettings() const override;
+  const char* getSettingName(int i) const override;
+  const char* getSettingValue(int i) const override;
+  bool setSettingValue(const char* name, const char* value) override;
+};
+
+extern MeshadventurerBoard board;
+extern WRAPPER_CLASS radio_driver;
+extern AutoDiscoverRTCClock rtc_clock;
+extern MASensorManager sensors;
+
+#ifdef DISPLAY_CLASS
+  extern DISPLAY_CLASS display;
+  extern MomentaryButton user_btn;
+#endif
+
+
+bool radio_init();
+mesh::LocalIdentity radio_new_identity();
+

variants/meshadventurer/variant.h

@@ -0,0 +1,44 @@
+// For OLED LCD
+#define I2C_SDA 21
+#define I2C_SCL 22
+
+// For GPS, 'undef's not needed
+#define GPS_TX_PIN 15
+#define GPS_RX_PIN 12
+#define PIN_GPS_EN 4
+#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
+
+#define BUTTON_PIN 39  // The middle button GPIO on the T-Beam
+#define BATTERY_PIN 35 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+#define ADC_CHANNEL ADC1_GPIO35_CHANNEL
+#define ADC_MULTIPLIER 2
+#define EXT_PWR_DETECT 4    // Pin to detect connected external power source for LILYGO® TTGO T-Energy T18 and other DIY boards
+#define EXT_NOTIFY_OUT 12   // Overridden default pin to use for Ext Notify Module (#975).
+#define LED_PIN 2           // add status LED (compatible with core-pcb and DIY targets)
+
+// Radio
+#define USE_SX1262 // E22-900M30S uses SX1262
+#define USE_SX1268 // E22-400M30S uses SX1268
+#define SX126X_MAX_POWER 22 // Outputting 22dBm from SX1262 results in ~30dBm E22-900M30S output (module only uses last stage of the YP2233W PA)
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
+
+#define SX126X_CS 18    // EBYTE module's NSS pin
+#define SX126X_SCK 5    // EBYTE module's SCK pin
+#define SX126X_MOSI 27  // EBYTE module's MOSI pin
+#define SX126X_MISO 19  // EBYTE module's MISO pin
+#define SX126X_RESET 23 // EBYTE module's NRST pin
+#define SX126X_BUSY 32  // EBYTE module's BUSY pin
+#define SX126X_DIO1 33  // EBYTE module's DIO1 pin
+
+// The E22's TXEN pin is connected to MCU pin, E22's RXEN pin is connected to MCU pin (allows for ramping up PA before transmission
+// Don't define DIO2_AS_RF_SWITCH because we only use DIO2 or an MCU pin mutually exclusively to connect to E22's TXEN (to prevent
+// a short if they are both connected at the same time and there's a slight non-neglibible delay and/or voltage difference between
+// DIO2 and TXEN).
+#define SX126X_TXEN 13 // Schematic connects EBYTE module's TXEN pin to MCU
+#define SX126X_RXEN 14 // Schematic connects EBYTE module's RXEN pin to MCU
+
+#define LORA_CS SX126X_CS     // Compatibility with variant file configuration structure
+#define LORA_SCK SX126X_SCK   // Compatibility with variant file configuration structure
+#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
+#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure
+#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure