Add MeshCore relay_radio firmware for Heltec T114

variants/minewsemi_me25ls01/MinewsemiME25LS01Board.h

@@ -0,0 +1,79 @@
+#pragma once
+
+#include <MeshCore.h>
+#include <Arduino.h>
+#include <helpers/NRF52Board.h>
+
+// LoRa and SPI pins
+
+#define  P_LORA_DIO_1   (32 + 12)  // P1.12
+#define  P_LORA_NSS     (32 + 13)  // P1.13
+#define  P_LORA_RESET   (32 + 11)  // P1.11
+#define  P_LORA_BUSY    (32 + 10)  // P1.10
+#define  P_LORA_SCLK    (32 + 15)  // P1.15
+#define  P_LORA_MISO    (0 + 29)   // P0.29
+#define  P_LORA_MOSI    (0 + 2)    // P0.2
+ 
+#define LR11X0_DIO_AS_RF_SWITCH  true
+#define LR11X0_DIO3_TCXO_VOLTAGE   1.6
+
+#define  PIN_VBAT_READ BATTERY_PIN
+#define  ADC_MULTIPLIER   (1.815f) // dependent on voltage divider resistors. TODO: more accurate battery tracking
+
+class MinewsemiME25LS01Board : public NRF52BoardDCDC {
+protected:
+  uint8_t btn_prev_state;
+
+public:
+  MinewsemiME25LS01Board() : NRF52Board("Minewsemi_OTA") {}
+  void begin();
+
+#define BATTERY_SAMPLES 8
+
+  uint16_t getBattMilliVolts() override {
+    analogReadResolution(12);
+
+    uint32_t raw = 0;
+    for (int i = 0; i < BATTERY_SAMPLES; i++) {
+      raw += analogRead(PIN_VBAT_READ);
+    }
+    raw = raw / BATTERY_SAMPLES;
+    return (ADC_MULTIPLIER * raw);
+  }
+
+  const char* getManufacturerName() const override {
+    return "Minewsemi";
+  }
+
+  void powerOff() override {
+    #ifdef HAS_GPS
+        digitalWrite(GPS_VRTC_EN, LOW);
+        digitalWrite(GPS_RESET, LOW);
+        digitalWrite(GPS_SLEEP_INT, LOW);
+        digitalWrite(GPS_RTC_INT, LOW);
+        pinMode(GPS_RESETB, OUTPUT);
+        digitalWrite(GPS_RESETB, LOW);
+    #endif
+    
+    #ifdef BUZZER_EN
+        digitalWrite(BUZZER_EN, LOW);
+    #endif
+    
+    #ifdef LED_PIN
+    digitalWrite(LED_PIN, LOW);
+    #endif
+    #ifdef BUTTON_PIN
+    nrf_gpio_cfg_sense_input(digitalPinToInterrupt(BUTTON_PIN), NRF_GPIO_PIN_PULLUP, NRF_GPIO_PIN_SENSE_LOW);
+    #endif
+    sd_power_system_off();
+  }
+
+  #if defined(P_LORA_TX_LED)
+  void onBeforeTransmit() override {
+    digitalWrite(P_LORA_TX_LED, HIGH);// turn TX LED on
+  }
+  void onAfterTransmit() override {
+    digitalWrite(P_LORA_TX_LED, LOW); // turn TX LED off
+  }
+#endif
+};