Add MeshCore relay_radio firmware for Heltec T114

variants/rak4631/platformio.ini

@@ -0,0 +1,202 @@
+[rak4631]
+extends = nrf52_base
+board = rak4631
+board_check = true
+extra_scripts = ${nrf52_base.extra_scripts}
+  post:variants/rak4631/fix_bsec_lib.py
+build_flags = ${nrf52_base.build_flags}
+  ${sensor_base.build_flags}
+  -I variants/rak4631
+  -D RAK_4631
+  -D RAK_BOARD
+  -D NRF52_POWER_MANAGEMENT
+  -D PIN_BOARD_SCL=14
+  -D PIN_BOARD_SDA=13
+  -D PIN_GPS_TX=PIN_SERIAL1_RX
+  -D PIN_GPS_RX=PIN_SERIAL1_TX
+  -D PIN_GPS_EN=-1
+  -D PIN_OLED_RESET=-1
+  -D USE_SX1262
+  -D RADIO_CLASS=CustomSX1262
+  -D WRAPPER_CLASS=CustomSX1262Wrapper
+  -D LORA_TX_POWER=22
+  -D SX126X_CURRENT_LIMIT=140
+  -D SX126X_RX_BOOSTED_GAIN=1
+  -D ENV_INCLUDE_RAK12035=1
+  -UENV_INCLUDE_BME680
+  -D ENV_INCLUDE_BME680_BSEC=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<../variants/rak4631>
+  +<helpers/sensors>
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/ui/MomentaryButton.cpp>
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${sensor_base.lib_deps}
+  adafruit/Adafruit SSD1306 @ ^2.5.13
+  sparkfun/SparkFun u-blox GNSS Arduino Library@^2.2.27
+  boschsensortec/BSEC Software Library @ ^1.8.1492
+
+[env:RAK_4631_repeater]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK4631 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_repeater>
+
+[env:RAK_4631_repeater_bridge_rs232_serial1]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RS232 Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_RS232_BRIDGE=Serial1
+  -D WITH_RS232_BRIDGE_RX=PIN_SERIAL1_RX
+  -D WITH_RS232_BRIDGE_TX=PIN_SERIAL1_TX
+  -UENV_INCLUDE_GPS
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+;  -D CORE_DEBUG_LEVEL=3
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/bridges/RS232Bridge.cpp>
+  +<../examples/simple_repeater>
+
+[env:RAK_4631_repeater_bridge_rs232_serial2]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RS232 Bridge"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+  -D WITH_RS232_BRIDGE=Serial2
+  -D WITH_RS232_BRIDGE_RX=PIN_SERIAL2_RX
+  -D WITH_RS232_BRIDGE_TX=PIN_SERIAL2_TX
+  -UENV_INCLUDE_GPS
+;  -D BRIDGE_DEBUG=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+;  -D CORE_DEBUG_LEVEL=3
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<helpers/bridges/RS232Bridge.cpp>
+  +<../examples/simple_repeater>
+
+[env:RAK_4631_room_server]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"Test Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_room_server>
+
+[env:RAK_4631_companion_radio_usb]
+extends = rak4631
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak4631.build_flags}
+  -I examples/companion_radio/ui-new
+  -D PIN_USER_BTN=9
+  -D PIN_USER_BTN_ANA=31
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+; NOTE: DO NOT ENABLE -->  -D MESH_PACKET_LOGGING=1
+; NOTE: DO NOT ENABLE -->  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak4631.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_4631_companion_radio_ble]
+extends = rak4631
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 712704
+build_flags =
+  ${rak4631.build_flags}
+  -I examples/companion_radio/ui-new
+  -D PIN_USER_BTN=9
+  -D PIN_USER_BTN_ANA=31
+  -D DISPLAY_CLASS=SSD1306Display
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_DEBUG_LOGGING=1
+  -D OFFLINE_QUEUE_SIZE=256
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-new/*.cpp>
+lib_deps =
+  ${rak4631.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_4631_terminal_chat]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D PIN_USER_BTN=9
+  -D PIN_USER_BTN_ANA=31
+  -D MAX_CONTACTS=100
+  -D MAX_GROUP_CHANNELS=1
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<../examples/simple_secure_chat/main.cpp>
+lib_deps =
+  ${rak4631.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+
+[env:RAK_4631_sensor]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+  -D DISPLAY_CLASS=SSD1306Display
+  -D ADVERT_NAME='"RAK4631 Sensor"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+;  -D MESH_PACKET_LOGGING=1
+  -D MESH_DEBUG=1
+build_src_filter = ${rak4631.build_src_filter}
+  +<helpers/ui/SSD1306Display.cpp>
+  +<../examples/simple_sensor>
+
+[env:RAK_4631_kiss_modem]
+extends = rak4631
+build_flags =
+  ${rak4631.build_flags}
+build_src_filter = ${rak4631.build_src_filter}
+  +<../examples/kiss_modem/>
+lib_deps =
+  ${rak4631.lib_deps}