Add MeshCore relay_radio firmware for Heltec T114

variants/thinknode_m3/platformio.ini

@@ -0,0 +1,128 @@
+[ThinkNode_M3]
+extends = nrf52_base
+board = thinknode_m3
+board_build.ldscript = boards/nrf52840_s140_v6.ld
+build_flags = ${nrf52_base.build_flags}
+  -I src/helpers/nrf52
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include
+  -I lib/nrf52/s140_nrf52_6.1.1_API/include/nrf52
+  -I variants/thinknode_m3
+  -I src/helpers/ui
+  -D THINKNODE_M3
+  -D PIN_USER_BTN=12
+  -D PIN_STATUS_LED=35
+  -D RADIO_CLASS=CustomLR1110
+  -D WRAPPER_CLASS=CustomLR1110Wrapper
+  -D LORA_TX_POWER=22
+  -D RF_SWITCH_TABLE
+  -D RX_BOOSTED_GAIN=true
+  -D P_LORA_BUSY=43
+  -D P_LORA_SCLK=45
+  -D P_LORA_NSS=44
+  -D P_LORA_DIO_1=40
+  -D P_LORA_MISO=47
+  -D P_LORA_MOSI=46
+  -D P_LORA_RESET=42
+  -D P_LORA_TX_LED=PIN_LED_BLUE
+  -D P_LORA_TX_LED_ON=LOW
+  -D LR11X0_DIO_AS_RF_SWITCH=true
+  -D LR11X0_DIO3_TCXO_VOLTAGE=3.3
+  -D MESH_DEBUG=1
+  -D ENV_INCLUDE_GPS=1
+build_src_filter = ${nrf52_base.build_src_filter}
+  +<helpers/*.cpp>
+  +<../variants/thinknode_m3>
+  +<helpers/sensors>
+debug_tool = stlink
+upload_protocol = nrfutil
+lib_deps= ${nrf52_base.lib_deps}
+
+[env:ThinkNode_M3_repeater]
+extends = ThinkNode_M3
+build_flags = ${ThinkNode_M3.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D ADVERT_NAME='"ThinkNode_M3 Repeater"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D MAX_NEIGHBOURS=50
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+build_src_filter = ${ThinkNode_M3.build_src_filter}
+  +<../examples/simple_repeater>
+lib_deps = ${ThinkNode_M3.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+
+[env:ThinkNode_M3_room_server]
+extends = ThinkNode_M3
+build_flags = ${ThinkNode_M3.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D ADVERT_NAME='"ThinkNode_M3 Room"'
+  -D ADVERT_LAT=0.0
+  -D ADVERT_LON=0.0
+  -D ADMIN_PASSWORD='"password"'
+  -D ROOM_PASSWORD='"hello"'
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+  -D RF_SWITCH_TABLE
+build_src_filter = ${ThinkNode_M3.build_src_filter}
+  +<../examples/simple_room_server>
+lib_deps = ${ThinkNode_M3.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6
+
+[env:ThinkNode_M3_companion_radio_usb]
+extends = ThinkNode_M3
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 708608
+build_flags = ${ThinkNode_M3.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+;  -D MESH_PACKET_LOGGING=1
+;  -D MESH_DEBUG=1
+  -D OFFLINE_QUEUE_SIZE=256
+  -D DISPLAY_CLASS=NullDisplayDriver
+  -D PIN_BUZZER=23
+  -D PIN_BUZZER_EN=36
+build_src_filter = ${ThinkNode_M3.build_src_filter}
+  +<helpers/ui/buzzer.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
+lib_deps = ${ThinkNode_M3.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  stevemarple/MicroNMEA @ ^2.0.6
+  end2endzone/NonBlockingRTTTL@^1.3.0
+
+[env:ThinkNode_M3_companion_radio_ble]
+extends = ThinkNode_M3
+board_build.ldscript = boards/nrf52840_s140_v6_extrafs.ld
+board_upload.maximum_size = 708608
+build_flags = ${ThinkNode_M3.build_flags}
+  -I examples/companion_radio/ui-orig
+  -D MAX_CONTACTS=350
+  -D MAX_GROUP_CHANNELS=40
+  -D BLE_PIN_CODE=123456
+  -D BLE_TX_POWER=0
+;  -D BLE_DEBUG_LOGGING=1
+;  -D MESH_PACKET_LOGGING=1
+  -D GPS_NMEA_DEBUG
+  -D OFFLINE_QUEUE_SIZE=256
+  -D DISPLAY_CLASS=NullDisplayDriver
+  -D PIN_BUZZER=23
+  -D PIN_BUZZER_EN=36
+build_src_filter = ${ThinkNode_M3.build_src_filter}
+  +<helpers/nrf52/SerialBLEInterface.cpp>
+  +<helpers/ui/buzzer.cpp>
+  +<../examples/companion_radio/*.cpp>
+  +<../examples/companion_radio/ui-orig/*.cpp>
+lib_deps = ${ThinkNode_M3.lib_deps}
+  densaugeo/base64 @ ~1.4.0
+  stevemarple/MicroNMEA @ ^2.0.6
+  end2endzone/NonBlockingRTTTL@^1.3.0
+
+[env:ThinkNode_M3_kiss_modem]
+extends = ThinkNode_M3
+build_src_filter = ${ThinkNode_M3.build_src_filter}
+  +<../examples/kiss_modem/>
+lib_deps = ${ThinkNode_M3.lib_deps}
+  stevemarple/MicroNMEA @ ^2.0.6