Initial commit: Simple Sensor firmware for Heltec T114 with BME280

- MeshCore-based Simple Sensor firmware
- Heltec T114 without display
- BME280 sensor support (temp/humidity/pressure)
- Radio: 868.856018 MHz, SF7, BW62.5 kHz, CR4/7
- 2-byte path hash
- PlatformIO project

variants/heltec_mesh_solar/target.cpp

@@ -0,0 +1,123 @@
+#include <Arduino.h>
+#include "target.h"
+#include <helpers/ArduinoHelpers.h>
+#include <helpers/sensors/MicroNMEALocationProvider.h>
+
+MeshSolarBoard board;
+
+RADIO_CLASS radio = new Module(P_LORA_NSS, P_LORA_DIO_1, P_LORA_RESET, P_LORA_BUSY, SPI);
+
+WRAPPER_CLASS radio_driver(radio, board);
+
+VolatileRTCClock fallback_clock;
+AutoDiscoverRTCClock rtc_clock(fallback_clock);
+MicroNMEALocationProvider nmea = MicroNMEALocationProvider(Serial1, &rtc_clock);
+SolarSensorManager sensors = SolarSensorManager(nmea);
+
+#ifdef DISPLAY_CLASS
+  DISPLAY_CLASS display;
+#endif
+
+bool radio_init() {
+  rtc_clock.begin(Wire);
+  return radio.std_init(&SPI);
+}
+
+uint32_t radio_get_rng_seed() {
+  return radio.random(0x7FFFFFFF);
+}
+
+void radio_set_params(float freq, float bw, uint8_t sf, uint8_t cr) {
+  radio.setFrequency(freq);
+  radio.setSpreadingFactor(sf);
+  radio.setBandwidth(bw);
+  radio.setCodingRate(cr);
+}
+
+void radio_set_tx_power(int8_t dbm) {
+  radio.setOutputPower(dbm);
+}
+
+mesh::LocalIdentity radio_new_identity() {
+  RadioNoiseListener rng(radio);
+  return mesh::LocalIdentity(&rng);  // create new random identity
+}
+
+void SolarSensorManager::start_gps() {
+  if (!gps_active) {
+    gps_active = true;
+    _location->begin();
+  }
+}
+
+void SolarSensorManager::stop_gps() {
+  if (gps_active) {
+    gps_active = false;
+    _location->stop();
+  }
+}
+
+bool SolarSensorManager::begin() {
+  Serial1.begin(9600);
+
+  // We'll consider GPS detected if we see any data on Serial1
+  gps_detected = (Serial1.available() > 0);
+
+  if (gps_detected) {
+    MESH_DEBUG_PRINTLN("GPS detected");
+  } else {
+    MESH_DEBUG_PRINTLN("No GPS detected");
+  }
+
+  return true;
+}
+
+bool SolarSensorManager::querySensors(uint8_t requester_permissions, CayenneLPP& telemetry) {
+  if (requester_permissions & TELEM_PERM_LOCATION) {   // does requester have permission?
+    telemetry.addGPS(TELEM_CHANNEL_SELF, node_lat, node_lon, node_altitude);
+  }
+  return true;
+}
+
+void SolarSensorManager::loop() {
+  static long next_gps_update = 0;
+
+  _location->loop();
+
+  if (millis() > next_gps_update) {
+    if (_location->isValid()) {
+      node_lat = ((double)_location->getLatitude())/1000000.;
+      node_lon = ((double)_location->getLongitude())/1000000.;
+      node_altitude = ((double)_location->getAltitude()) / 1000.0;
+      MESH_DEBUG_PRINTLN("lat %f lon %f", node_lat, node_lon);
+    }
+    next_gps_update = millis() + 1000;
+  }
+}
+
+int SolarSensorManager::getNumSettings() const {
+  return gps_detected ? 1 : 0;  // only show GPS setting if GPS is detected
+}
+
+const char* SolarSensorManager::getSettingName(int i) const {
+  return (gps_detected && i == 0) ? "gps" : NULL;
+}
+
+const char* SolarSensorManager::getSettingValue(int i) const {
+  if (gps_detected && i == 0) {
+    return gps_active ? "1" : "0";
+  }
+  return NULL;
+}
+
+bool SolarSensorManager::setSettingValue(const char* name, const char* value) {
+  if (gps_detected && strcmp(name, "gps") == 0) {
+    if (strcmp(value, "0") == 0) {
+      stop_gps();
+    } else {
+      start_gps();
+    }
+    return true;
+  }
+  return false;  // not supported
+}