42f55e12ae
Some checks failed
Build and deploy Docs site to GitHub Pages / github-pages (push) Has been cancelled
PR Build Check / build (Heltec_v3_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (Heltec_v3_repeater) (push) Has been cancelled
PR Build Check / build (Heltec_v3_room_server) (push) Has been cancelled
PR Build Check / build (LilyGo_Tlora_C6_repeater_) (push) Has been cancelled
PR Build Check / build (PicoW_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_companion_radio_ble) (push) Has been cancelled
PR Build Check / build (RAK_4631_repeater) (push) Has been cancelled
PR Build Check / build (RAK_4631_room_server) (push) Has been cancelled
PR Build Check / build (wio-e5-mini_repeater) (push) Has been cancelled
- MeshCore-based Simple Sensor firmware - Heltec T114 without display - BME280 sensor support (temp/humidity/pressure) - Radio: 868.856018 MHz, SF7, BW62.5 kHz, CR4/7 - 2-byte path hash - PlatformIO project
35 lines
914 B
C++
35 lines
914 B
C++
#include <Arduino.h>
|
|
#include "TDeckBoard.h"
|
|
|
|
uint32_t deviceOnline = 0x00;
|
|
|
|
void TDeckBoard::begin() {
|
|
|
|
ESP32Board::begin();
|
|
|
|
// Enable peripheral power
|
|
pinMode(PIN_PERF_POWERON, OUTPUT);
|
|
digitalWrite(PIN_PERF_POWERON, HIGH);
|
|
|
|
// Configure user button
|
|
pinMode(PIN_USER_BTN, INPUT);
|
|
|
|
// Configure LoRa Pins
|
|
pinMode(P_LORA_MISO, INPUT_PULLUP);
|
|
// pinMode(P_LORA_DIO_1, INPUT_PULLUP);
|
|
|
|
#ifdef P_LORA_TX_LED
|
|
digitalWrite(P_LORA_TX_LED, HIGH); // inverted pin for SX1276 - HIGH for off
|
|
#endif
|
|
|
|
esp_reset_reason_t reason = esp_reset_reason();
|
|
if (reason == ESP_RST_DEEPSLEEP) {
|
|
long wakeup_source = esp_sleep_get_ext1_wakeup_status();
|
|
if (wakeup_source & (1 << P_LORA_DIO_1)) {
|
|
startup_reason = BD_STARTUP_RX_PACKET; // received a LoRa packet (while in deep sleep)
|
|
}
|
|
|
|
rtc_gpio_hold_dis((gpio_num_t)P_LORA_NSS);
|
|
rtc_gpio_deinit((gpio_num_t)P_LORA_DIO_1);
|
|
}
|
|
} |