From 478af5f49a88fa431d78d1e769421307cb03b51d Mon Sep 17 00:00:00 2001 From: egzumer Date: Mon, 6 Nov 2023 01:46:29 +0100 Subject: [PATCH] Updated Menu (markdown) --- Menu.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Menu.md b/Menu.md index e8b5e8e..dc6230e 100644 --- a/Menu.md +++ b/Menu.md @@ -24,8 +24,8 @@ Once the menu item is selected, pressing the up and down arrow keys will adjust The number in front of the menu-item-description is an **_menu item number_** that can be used for quick selection. 1. `Step` - step of the frequency (in kHz), up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value. 2.50/5/6.25/10.00/12.50/25.00/8.33 are the steps that can be set by programming software, all other steps are extension from standard software, and can only be selected from this menu entry. 1. `TxPwr` - radio output power (LOW/MID/HIGH) -1. `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received -1. `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received +1. `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received. You can start a DCS/CTCSS scan while you are in this menu option by pressing `* SCAN` button +1. `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received. You can start a DCS/CTCSS scan while you are in this menu option by pressing `* SCAN` button 1. `TxDCS` - transmitter Digital-Coded Squelch, radio will send given code while transmitting 1. `TxCTCS` - transmitter Continuous Tone-Coded Squelch System, radio will send given code while transmitting 1. `TxODir` - transmitter frequency offset direction