diff --git a/Menu.md b/Menu.md
index 9ad923a..fa49102 100644
--- a/Menu.md
+++ b/Menu.md
@@ -13,7 +13,7 @@ Once the menu item is selected, pressing the up and down arrow keys will adjust
 # Main menu
 
 The number in front of the menu-item-description is a **_menu item number_** that can be used for quick selection
-1. `Step` - step of the frequency (in kHz), up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value. 2.50/5/6.25/10.00/12.50/25.00/8.33 are the steps that can be set by programming software, all other steps are extension from standard software, and can only be selected from this menu entry
+1. `Step` - step of the frequency (in kHz), up/down buttons change frequency by this value, also you can only set a frequency that is multiple of half of this value.
 1. `TxPwr` - radio output power (LOW/MID/HIGH)
 1. `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received. You can start a DCS/CTCSS scan while you are in this menu option by pressing `* SCAN` button
 1. `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received. You can start a DCS/CTCSS scan while you are in this menu option by pressing `* SCAN` button
@@ -25,7 +25,7 @@ The number in front of the menu-item-description is a **_menu item number_** tha
    * WIDE - 25kHz
    * NARROW - 12.5kHz
 1. `Scramb` - scrambler, distorts the audio so it would be harder to understand for other listeners, if two radios use the same setting they can communicate
-1. `BusyCL` - busy channel lockout, blocks radio from transmitting because signal is being received (with **BUSY** on screen while PTT is pressed)
+1. `BusyCL` - busy channel lockout, blocks radio from transmitting when signal is being received
 1. `Compnd` - compander (compressor/expander), allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability, improves audio quality, both radios should use this option
 1. `Demodu` - demodulator mode, default is FM, AM/USB can be used for listening only
 1. `ScAdd1` - add channel to scan list 1