From 6b22dd43751382c720a9df05e013142fb8a0c0c2 Mon Sep 17 00:00:00 2001 From: Arikshten <50483950+Arikshten@users.noreply.github.com> Date: Thu, 30 Nov 2023 23:24:29 +0000 Subject: [PATCH] minor grammar corrections in hope this is of help .. --- Flashing-the-firmware.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/Flashing-the-firmware.md b/Flashing-the-firmware.md index 56df145..b7ada18 100644 --- a/Flashing-the-firmware.md +++ b/Flashing-the-firmware.md @@ -3,9 +3,9 @@ Flashing firmware is possible with a separate program, but can now be done much Just goto the page with official released [egzumer firmware releases](https://github.com/egzumer/uv-k5-firmware-custom/releases). * Use a Baofeng/Kenwood-like USB-2-Serial-cable and connect it to your computer. -* Switch of UV-K5 -* Put the UV-K5 in programming mode (press `PTT` and turn on the UV-K5 and check that the flashlight lights up). -* Press the programming cable _firmly_ into the radio +* Switch off UV-K5 +* Put the UV-K5 into programming mode (press and hold the `PTT` button and turn on the UV-K5, check that the flashlight lights up). +* Then press the programming cable _firmly_ into the radio * Select the latest/desired firmware and look for `🗲FLASH WITH A BROWSER🗲` @@ -19,7 +19,7 @@ Just wait a moment and the firmware is loaded, or select a different file from y -* Press Connect and programming starts (White LED starts flashing) and view the progress in the browser-screen +* Press Connect and the firmware programming starts (White LED starts flashing) and view the progress in the browser-screen * Just wait ... until ![100](https://github.com/egzumer/uv-k5-firmware-custom/assets/148579604/4cbcf252-dab0-45f8-b106-f753156eb95c)