diff --git a/Menu.md b/Menu.md index c3775ab..ac91b3b 100644 --- a/Menu.md +++ b/Menu.md @@ -1,87 +1,91 @@ # Main menu -* `Step` - step of the frequency, up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value -* `TxPwr` - radio output power -* `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received -* `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received -* `TxDCS` - transmitter Digital-Coded Squelch, radio will send given code while transmitting -* `TxCTCS` - transmitter Continuous Tone-Coded Squelch System, radio will send given code while transmitting -* `TxODir` - transmitter frequency offset direction -* `TxOffs` - transmitter frequency offset value -* `W/N` - bandwidth used by transceiver - * WIDE - 25kHz - * NARROW - 12.5kHz -* `Scramb` - scrambler, distorts the audio so it would be harder to understand for other listeners, if two radios use the same setting they can communicate -* `BusyCL` - busy channel lockout, blocks radio from transmitting while signal is being received -* `Compnd` - compander (compressor/expander), allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability, improves audio quality, both radios should use this option -* `Demodu` - demodulator mode, default is FM, AM can be used for listening only -* `ScAdd1` - add channel to scan list 1 -* `ScAdd2` - add channel to scan list 2 -* `ChSave` - save current setting to a memory channel -* `ChDele` - delete memory channel -* `ChName` - modify memory channel name -* `SList` - selects which channel is used by memory channel scanner -* `SList1` - channels assigned to scan list 1 -* `SList2` - channels assigned to scan list 2 -* `ScnRev` - scan resume mode - * CARRIER - resume scan after signal disappears - * TIMEOUT - resume scan after 5 seconds pause - * STOP - after receiving a signal, stop the scan -* `F1Shrt` - side button 1 short press function -* `F1Long` - side button 1 long press function -* `F2Shrt` - side button 2 short press function -* `F2Long` - side button 2 long press function -* `KeyLck` - auto keypad lock option -* `TxTOut` - max transmission time limit -* `BatSav` - battery save option, the rate between active time and sleep time -* `Mic` - microphone sensitivity -* `MicBar` - microphone bar that appears while transmitting -* `ChDisp` - channel display style -* `POnMsg` - power on message -* `BatTxt` - additional battery value on the status bar in % or V -* `BackLt` - backlight duration -* `BltTRX` - backlight activation on TX or RX -* `Beep` - keypad press beep sound -* `Roger` - roger beep at the end of transmission -* `STE` - squelch tail eliminator, eliminates noise at the end of a transmission -* `RP STE` - repeater squelch tail eliminator -* `1 Call` - one key call channel, lets you quickly switch to the channel with `9 Call` button -* `ANI ID` - DTMF communication radio ID -* `UPCode` - DTMF code that is sent at the beginning of transmission -* `DWCode` - DTMF code that is sent at the end of a transmission -* `PTT ID` - sets if `UPCode` and/or `DWCode` should be transmitted -* `D ST` - DTMF side tone switch, lets you hear transmitted tones in the radio speaker -* `D Resp` - DTMF decoding response - * DO NOTHING: do nothing - * RING - Local ringing - * REPLY - reply response - * BOTH - local ringing + reply response -* `D Hold` - DTMF auto reset time -* `D Prel` - DTMF pre-load time -* `D Decd` - enables DTMF decoder -* `D List` - list of DTMF constacts -* `D Live` - displays DTMF codes received by radio in the middle of the screen -* `AM Fix` - activates autogain AM fix function -* `VOX` - voice TX activation sensitivity level -* `BatVol` - battery voltage and percentage -* `RxMode` - sets how how the upper and lower frequency is used - * MAIN ONLY - always transmits and listens on the main frequency - * DUAL RX RESPOND - listens to both frequencies, if signal is received on the secondary frequency it locks to it for a couple of seconds so you can respond to the call - * CROSS BAND - always transmits on the primary and listens on the secondary frequency - * MAIN TX DUAL RX - always transmits on the primary, listens to both -* `Sql` - squelch sensitivity level + +1. `Step` - step of the frequency, up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value +1. `TxPwr` - radio output power +1. `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received +1. `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received +1. `TxDCS` - transmitter Digital-Coded Squelch, radio will send given code while transmitting +1. `TxCTCS` - transmitter Continuous Tone-Coded Squelch System, radio will send given code while transmitting +1. `TxODir` - transmitter frequency offset direction +1. `TxOffs` - transmitter frequency offset value +1. `W/N` - bandwidth used by transceiver + * WIDE - 25kHz + * NARROW - 12.5kHz +1. `Scramb` - scrambler, distorts the audio so it would be harder to understand for other listeners, if two radios use the same setting they can communicate +1. `BusyCL` - busy channel lockout, blocks radio from transmitting while signal is being received +1. `Compnd` - compander (compressor/expander), allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability, improves audio quality, both radios should use this option +1. `Demodu` - demodulator mode, default is FM, AM can be used for listening only +1. `ScAdd1` - add channel to scan list 1 +1. `ScAdd2` - add channel to scan list 2 +1. `ChSave` - save current setting to a memory channel +1. `ChDele` - delete memory channel +1. `ChName` - modify memory channel name +1. `SList` - selects which channel is used by memory channel scanner +1. `SList1` - channels assigned to scan list 1 +1. `SList2` - channels assigned to scan list 2 +1. `ScnRev` - scan resume mode + * CARRIER - resume scan after signal disappears + * TIMEOUT - resume scan after 5 seconds pause + * STOP - after receiving a signal, stop the scan +1. `F1Shrt` - side button 1 short press function +1. `F1Long` - side button 1 long press function +1. `F2Shrt` - side button 2 short press function +1. `F2Long` - side button 2 long press function +1. `M Long` - menu button long press function +1. `KeyLck` - auto keypad lock option +1. `TxTOut` - max transmission time limit +1. `BatSav` - battery save option, the rate between active time and sleep time +1. `Mic` - microphone sensitivity +1. `MicBar` - microphone bar that appears while transmitting +1. `ChDisp` - channel display style +1. `POnMsg` - power on message +1. `BatTxt` - additional battery value on the status bar in % or V +1. `BackLt` - backlight duration +1. `BLMin` - minimal backlight brightness, when the screen backlight turns OFF it will go dim to this value +2. `BLMax` - maximal backlight brightness, when the screen backlight turns ON it will turn bright to this value +1. `BltTRX` - backlight activation on TX or RX +1. `Beep` - keypad press beep sound +1. `Roger` - roger beep at the end of transmission +1. `STE` - squelch tail eliminator, eliminates noise at the end of a transmission +1. `RP STE` - repeater squelch tail eliminator +1. `1 Call` - one key call channel, lets you quickly switch to the channel with `9 Call` button +1. `ANI ID` - DTMF communication radio ID +1. `UPCode` - DTMF code that is sent at the beginning of transmission +1. `DWCode` - DTMF code that is sent at the end of a transmission +1. `PTT ID` - sets if `UPCode` and/or `DWCode` should be transmitted +1. `D ST` - DTMF side tone switch, lets you hear transmitted tones in the radio speaker +1. `D Resp` - DTMF decoding response + * DO NOTHING: do nothing + * RING - Local ringing + * REPLY - reply response + * BOTH - local ringing + reply response +1. `D Hold` - DTMF auto reset time +1. `D Prel` - DTMF pre-load time +1. `D Decd` - enables DTMF decoder +1. `D List` - list of DTMF constacts +1. `D Live` - displays DTMF codes received by radio in the middle of the screen +1. `AM Fix` - activates autogain AM fix function +1. `VOX` - voice TX activation sensitivity level +1. `BatVol` - battery voltage and percentage +1. `RxMode` - sets how how the upper and lower frequency is used + * MAIN ONLY - always transmits and listens on the main frequency + * DUAL RX RESPOND - listens to both frequencies, if signal is received on the secondary frequency it locks to it for a couple of seconds so you can respond to the call + * CROSS BAND - always transmits on the primary and listens on the secondary frequency + * MAIN TX DUAL RX - always transmits on the primary, listens to both +1. `Sql` - squelch sensitivity level # Hidden menu Hidden menu is accessed by holding `PTT` + `SIDE BUTTON 1` while turning on the radio -* `F Lock` - sets the frequency band plan for certain area -* `Tx 200` - enables TX on 200MHz -* `Tx 350` - enables TX on 350MHz -* `Tx 500` - enables TX on 500MHz -* `350 En` - enables RX on 350MHz -* `ScraEn` - enables scrambler function -* `TxEnab` - disables TX on all frequencies -* `BatCal` - battery calibration, measure the voltage on the back of the radio, and adjust the value in the menu accordingly -* `Reset` - resets radio configuration settings - * VFO - removes only channel settings - * ALL - resets all radio settings \ No newline at end of file +61. `F Lock` - sets the frequency band plan for certain area +1. `Tx 200` - enables TX on 200MHz +1. `Tx 350` - enables TX on 350MHz +1. `Tx 500` - enables TX on 500MHz +1. `350 En` - enables RX on 350MHz +1. `ScraEn` - enables scrambler function +1. `TxEnab` - disables TX on all frequencies +1. `BatCal` - battery calibration, measure the voltage on the back of the radio, and adjust the value in the menu accordingly +1. `Reset` - resets radio configuration settings + * VFO - removes only channel settings + * ALL - resets all radio settings \ No newline at end of file