diff --git a/Flashing-the-firmware.md b/Flashing-the-firmware.md
index 687f846..56df145 100644
--- a/Flashing-the-firmware.md
+++ b/Flashing-the-firmware.md
@@ -3,37 +3,26 @@ Flashing firmware is possible with a separate program, but can now be done much
Just goto the page with official released [egzumer firmware releases](https://github.com/egzumer/uv-k5-firmware-custom/releases).
* Use a Baofeng/Kenwood-like USB-2-Serial-cable and connect it to your computer.
-
+* Switch of UV-K5
+* Put the UV-K5 in programming mode (press `PTT` and turn on the UV-K5 and check that the flashlight lights up).
* Press the programming cable _firmly_ into the radio
-* Switch of UV-K5
-
-* Put the UV-K5 in programming mode (press `PTT` and turn on the UV-K5 and check that the flashlight lights up).
-
* Select the latest/desired firmware and look for
- `🗲FLASH WITH A BROWSER🗲`
+`🗲FLASH WITH A BROWSER🗲`
and the build-in _UV-mod-programming-page_ start.
Just wait a moment and the firmware is loaded, or select a different file from your PC.
-
+
* Press flash firmware and a screen pops-up.
-
-> If it is this screen, you are probably using Firefox.
-> 
->
-> Solution is to use Chrome.
-> And than you can continue with ..
-
* Select the Com-port where the programming-interface is connected.
-
+
* Press Connect and programming starts (White LED starts flashing) and view the progress in the browser-screen
-
* Just wait ... until
-> 
+
When finished, disconnect the programming interface and _enjoy a new release version_ ;-)