From daabb518b492d9bd661868d22e288a18e2edf84d Mon Sep 17 00:00:00 2001 From: egzumer Date: Fri, 3 Nov 2023 20:56:44 +0100 Subject: [PATCH] Updated Menu (markdown) --- Menu.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Menu.md b/Menu.md index 91abf47..88bcc98 100644 --- a/Menu.md +++ b/Menu.md @@ -22,7 +22,7 @@ Once the menu item is selected, pressing the up and down arrow keys will adjust # Main menu The number in front of the menu-item-description is an **_menu item number_** that can be used for quick selection. -1. `Step` - step of the frequency (in kHz), up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value (1,25/2.50/6.25/10.00/12.50/25.00/8.33) +1. `Step` - step of the frequency (in kHz), up/down buttons change frequency by this value, also you can only set a frequency that is multiple of this value. 2.50/5/6.25/10.00/12.50/25.00/8.33 are the steps that can be set by programming software, all other steps are extension from standard software, and can only be selected from this menu entry. 1. `TxPwr` - radio output power (LOW/MID/HIGH) 1. `RxDCS` - receiver Digital-Coded Squelch, if you enable this, squelch will only unlock if this code is being received 1. `RxCTCS` - receiver Continuous Tone-Coded Squelch System, squelch will only unlock if this code is being received @@ -36,7 +36,7 @@ The number in front of the menu-item-description is an **_menu item number_** th 1. `Scramb` - scrambler, distorts the audio so it would be harder to understand for other listeners, if two radios use the same setting they can communicate 1. `BusyCL` - busy channel lockout, blocks radio from transmitting while signal is being received 1. `Compnd` - compander (compressor/expander), allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability, improves audio quality, both radios should use this option -1. `Demodu` - demodulator mode, default is FM, AM/USB can be used for listening only +1. `Demodu` - demodulator mode, default is FM, AM/USB can be used for listening only 1. `ScAdd1` - add channel to scan list 1 1. `ScAdd2` - add channel to scan list 2 1. `ChSave` - save current setting to a memory channel