UA1ZBE Custom Firmware v1.0
Features: - VFO mode with direct frequency input - POCSAG decoder (512/1200 baud) with BCH(31,21) correction - Full-screen Spectrum analyzer - FM Radio receiver - RSSI signal indicator overlay - Custom boot splash (UA1ZBE / POCSAG pager / build date) Architecture: - app/mode.c — mode dispatcher (VFO/POCSAG/Spectrum/FM) - app/boot_splash.c — 2-second boot splash - app/pocsag/ — POCSAG decoder + BCH correction - app/display_rssi.c — RSSI indicator - main.c — entry point with custom init - syscalls.c — bare-metal _sbrk stub Build: arm-none-eabi-gcc -Os -flto -Wall -Werror -Wextra Size: 57.9KB Flash / 3.6KB RAM Controls: - 0-9: Direct frequency input (VFO) - SK2: POCSAG mode - SK1: Spectrum analyzer - 0: FM Radio - EXIT: Return to VFO - F/*: Toggle 512/1200 baud (in POCSAG)
This commit is contained in:
242
app/aircopy.c
Normal file
242
app/aircopy.c
Normal file
@@ -0,0 +1,242 @@
|
||||
/* Copyright 2023 Dual Tachyon
|
||||
* https://github.com/DualTachyon
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the "License");
|
||||
* you may not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* http://www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an "AS IS" BASIS,
|
||||
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifdef ENABLE_AIRCOPY
|
||||
|
||||
#include "app/aircopy.h"
|
||||
#include "audio.h"
|
||||
#include "driver/bk4819.h"
|
||||
#include "driver/crc.h"
|
||||
#include "driver/eeprom.h"
|
||||
#include "frequencies.h"
|
||||
#include "misc.h"
|
||||
#include "radio.h"
|
||||
#include "ui/helper.h"
|
||||
#include "ui/inputbox.h"
|
||||
#include "ui/ui.h"
|
||||
|
||||
static const uint16_t Obfuscation[8] = { 0x6C16, 0xE614, 0x912E, 0x400D, 0x3521, 0x40D5, 0x0313, 0x80E9 };
|
||||
|
||||
AIRCOPY_State_t gAircopyState;
|
||||
uint16_t gAirCopyBlockNumber;
|
||||
uint16_t gErrorsDuringAirCopy;
|
||||
uint8_t gAirCopyIsSendMode;
|
||||
|
||||
uint16_t g_FSK_Buffer[36];
|
||||
|
||||
bool AIRCOPY_SendMessage(void)
|
||||
{
|
||||
static uint8_t gAircopySendCountdown = 1;
|
||||
|
||||
if (gAircopyState != AIRCOPY_TRANSFER) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
if (--gAircopySendCountdown) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
g_FSK_Buffer[1] = (gAirCopyBlockNumber & 0x3FF) << 6;
|
||||
|
||||
EEPROM_ReadBuffer(g_FSK_Buffer[1], &g_FSK_Buffer[2], 64);
|
||||
|
||||
g_FSK_Buffer[34] = CRC_Calculate(&g_FSK_Buffer[1], 2 + 64);
|
||||
|
||||
for (unsigned int i = 0; i < 34; i++) {
|
||||
g_FSK_Buffer[i + 1] ^= Obfuscation[i % 8];
|
||||
}
|
||||
|
||||
if (++gAirCopyBlockNumber >= 0x78) {
|
||||
gAircopyState = AIRCOPY_COMPLETE;
|
||||
}
|
||||
|
||||
RADIO_SetTxParameters();
|
||||
|
||||
BK4819_SendFSKData(g_FSK_Buffer);
|
||||
BK4819_SetupPowerAmplifier(0, 0);
|
||||
BK4819_ToggleGpioOut(BK4819_GPIO1_PIN29_PA_ENABLE, false);
|
||||
|
||||
gAircopySendCountdown = 30;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void AIRCOPY_StorePacket(void)
|
||||
{
|
||||
if (gFSKWriteIndex < 36) {
|
||||
return;
|
||||
}
|
||||
|
||||
gFSKWriteIndex = 0;
|
||||
gUpdateDisplay = true;
|
||||
uint16_t Status = BK4819_ReadRegister(BK4819_REG_0B);
|
||||
BK4819_PrepareFSKReceive();
|
||||
|
||||
// Doc says bit 4 should be 1 = CRC OK, 0 = CRC FAIL, but original firmware checks for FAIL.
|
||||
|
||||
if ((Status & 0x0010U) != 0 || g_FSK_Buffer[0] != 0xABCD || g_FSK_Buffer[35] != 0xDCBA) {
|
||||
gErrorsDuringAirCopy++;
|
||||
return;
|
||||
}
|
||||
|
||||
for (unsigned int i = 0; i < 34; i++) {
|
||||
g_FSK_Buffer[i + 1] ^= Obfuscation[i % 8];
|
||||
}
|
||||
|
||||
uint16_t CRC = CRC_Calculate(&g_FSK_Buffer[1], 2 + 64);
|
||||
if (g_FSK_Buffer[34] != CRC) {
|
||||
gErrorsDuringAirCopy++;
|
||||
return;
|
||||
}
|
||||
|
||||
uint16_t Offset = g_FSK_Buffer[1];
|
||||
|
||||
if (Offset >= 0x1E00) {
|
||||
gErrorsDuringAirCopy++;
|
||||
return;
|
||||
}
|
||||
|
||||
const uint16_t *pData = &g_FSK_Buffer[2];
|
||||
for (unsigned int i = 0; i < 8; i++) {
|
||||
EEPROM_WriteBuffer(Offset, pData);
|
||||
pData += 4;
|
||||
Offset += 8;
|
||||
}
|
||||
|
||||
if (Offset == 0x1E00) {
|
||||
gAircopyState = AIRCOPY_COMPLETE;
|
||||
}
|
||||
|
||||
gAirCopyBlockNumber++;
|
||||
}
|
||||
|
||||
static void AIRCOPY_Key_DIGITS(KEY_Code_t Key, bool bKeyPressed, bool bKeyHeld)
|
||||
{
|
||||
if (bKeyHeld || !bKeyPressed) {
|
||||
return;
|
||||
}
|
||||
|
||||
INPUTBOX_Append(Key);
|
||||
|
||||
gRequestDisplayScreen = DISPLAY_AIRCOPY;
|
||||
|
||||
if (gInputBoxIndex < 6) {
|
||||
#ifdef ENABLE_VOICE
|
||||
gAnotherVoiceID = (VOICE_ID_t)Key;
|
||||
#endif
|
||||
return;
|
||||
}
|
||||
|
||||
gInputBoxIndex = 0;
|
||||
uint32_t Frequency = StrToUL(INPUTBOX_GetAscii()) * 100;
|
||||
|
||||
for (unsigned int i = 0; i < BAND_N_ELEM; i++) {
|
||||
if (Frequency < frequencyBandTable[i].lower || Frequency >= frequencyBandTable[i].upper) {
|
||||
continue;
|
||||
}
|
||||
|
||||
if (TX_freq_check(Frequency)) {
|
||||
continue;
|
||||
}
|
||||
|
||||
#ifdef ENABLE_VOICE
|
||||
gAnotherVoiceID = (VOICE_ID_t)Key;
|
||||
#endif
|
||||
|
||||
Frequency = FREQUENCY_RoundToStep(Frequency, gRxVfo->StepFrequency);
|
||||
gRxVfo->Band = i;
|
||||
gRxVfo->freq_config_RX.Frequency = Frequency;
|
||||
gRxVfo->freq_config_TX.Frequency = Frequency;
|
||||
RADIO_ConfigureSquelchAndOutputPower(gRxVfo);
|
||||
gCurrentVfo = gRxVfo;
|
||||
RADIO_SetupRegisters(true);
|
||||
BK4819_SetupAircopy();
|
||||
BK4819_ResetFSK();
|
||||
return;
|
||||
}
|
||||
|
||||
gRequestDisplayScreen = DISPLAY_AIRCOPY;
|
||||
}
|
||||
|
||||
static void AIRCOPY_Key_EXIT(bool bKeyPressed, bool bKeyHeld)
|
||||
{
|
||||
if (bKeyHeld || !bKeyPressed) {
|
||||
return;
|
||||
}
|
||||
|
||||
if (gInputBoxIndex == 0) {
|
||||
gFSKWriteIndex = 0;
|
||||
gAirCopyBlockNumber = 0;
|
||||
gInputBoxIndex = 0;
|
||||
gErrorsDuringAirCopy = 0;
|
||||
gAirCopyIsSendMode = 0;
|
||||
|
||||
BK4819_PrepareFSKReceive();
|
||||
|
||||
gAircopyState = AIRCOPY_TRANSFER;
|
||||
} else {
|
||||
gInputBox[--gInputBoxIndex] = 10;
|
||||
}
|
||||
|
||||
gRequestDisplayScreen = DISPLAY_AIRCOPY;
|
||||
}
|
||||
|
||||
static void AIRCOPY_Key_MENU(bool bKeyPressed, bool bKeyHeld)
|
||||
{
|
||||
if (bKeyHeld || !bKeyPressed) {
|
||||
return;
|
||||
}
|
||||
|
||||
gFSKWriteIndex = 0;
|
||||
gAirCopyBlockNumber = 0;
|
||||
gInputBoxIndex = 0;
|
||||
gAirCopyIsSendMode = 1;
|
||||
g_FSK_Buffer[0] = 0xABCD;
|
||||
g_FSK_Buffer[1] = 0;
|
||||
g_FSK_Buffer[35] = 0xDCBA;
|
||||
|
||||
GUI_DisplayScreen();
|
||||
|
||||
gAircopyState = AIRCOPY_TRANSFER;
|
||||
}
|
||||
|
||||
void AIRCOPY_ProcessKeys(KEY_Code_t Key, bool bKeyPressed, bool bKeyHeld)
|
||||
{
|
||||
switch (Key) {
|
||||
case KEY_0:
|
||||
case KEY_1:
|
||||
case KEY_2:
|
||||
case KEY_3:
|
||||
case KEY_4:
|
||||
case KEY_5:
|
||||
case KEY_6:
|
||||
case KEY_7:
|
||||
case KEY_8:
|
||||
case KEY_9:
|
||||
AIRCOPY_Key_DIGITS(Key, bKeyPressed, bKeyHeld);
|
||||
break;
|
||||
case KEY_MENU:
|
||||
AIRCOPY_Key_MENU(bKeyPressed, bKeyHeld);
|
||||
break;
|
||||
case KEY_EXIT:
|
||||
AIRCOPY_Key_EXIT(bKeyPressed, bKeyHeld);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user